1,703Jobs Listed So Far

Posted: 17 February 2019
Budget: No set budget
Mount Eliza, VIC 3930

I have a 2007 MY 2008 Porsche Cayman (not the big Cayenne) which is the hard version of the boxer. Seeking someone who has a history of servicing Porsche vehicles and is familiar with this model to provide service as required that provides value for money.

Currently there is a clunking sound when I go over speed humps or over bumps. Checking the internet other drivers have had this issue and the comments are that 'sounds like a loose rear swaybar' or a 'rear trailing arm - bad bushing inboard'.

Specific Job Details:

Schedule: Need job done any time in the coming 2 weeks.

Budget: Not Specified

Site Visit: Anytime

Posted: 16 February 2019
Budget: No set budget
Pascoe Vale, VIC 3044

The air recirculation motor on my Jetta 2015 appears to be broken making noise like you can find in https://www.youtube.com/watch?v=afrQQWIYROQ.

This is the part number that seems need replacement as confirmed with Volkswagen 1K[phone/email supplied]Q and the vin of my car is WVWZZZ16ZFM[phone/email supplied]. Since it's just a air recirculation motor, I don't mind a non genuine motor replacement or alternatively a genuine 2nd hand one that still works would be fine too.

I would like to get the quote to fix this including the cost of the motor unit and the duration it'll take to replace it. Thanks!

Specific Job Details:

Schedule: Need job done in the next couple of weeks

Budget: Not Specified

Site Visit: No site visit required

Posted: 16 February 2019
Budget: No set budget
Wandi, WA 6167

Fit new Xforce 3 inch stainless exhaust to 2013 holden colorado. I have the full kit here and there is no welding or cutting needed. The ute has a 2 inch lift so its a bit esier to get under.

Specific Job Details:

Need job done urgently

Site Visit: Any day
Visit during: Anytime

Posted: 13 February 2019
Budget: No set budget
Cheltenham East, VIC 3192

[ This Customer has not provided a phone number. Only express interest if you're happy to correspond by message through the site. - Customer Support ]

I would like someone to install the frame slider.

Need to be professional and has own equipment. The parts have been bought online.

It is a Kawasaki ninja 650

Specific Job Details:

Schedule: Need job done this week

Budget: Not Specified

Site Visit: Anytime

Posted: 12 February 2019
Budget: No set budget
Bull Creek, WA 6149

2009 Pagsta Cruiser Inherited from my Dad not started for years, need carburetor replaced, I the new carburetor, just need it replaced. I have taken the fuel tank and seat off already.

Specific Job Details:

Schedule: Need job done this week

Budget: Not Specified

Site Visit: Anytime

Posted: 12 February 2019
Budget: No set budget
Heidelberg Heights, VIC 3081

To change head gasket on a old 6 cylinder engine. Will supply head gasket . Just need head taken off and cleaned up and replaced with new gasket. Photo of engine supplied

Specific Job Details:

Schedule: Need job done this week

Budget: Not Specified

Site Visit: Anytime

Posted: 12 February 2019
Budget: No set budget
Eastwood, NSW 2122

Hi I need My Starter motor to be fixed, It seems there is some oil leak near starter motor. You can provide me supply and install quote. Or i have found a supplier in Silverwater that supplies the parts for $137 .you would need to pick from him and Co-Ordinate and install etc.
The Car is currently parked in Henderson St, Denistone NSW

Specific Job Details:

Schedule: Need job done on 12/02/2019 at 5:45 PM

Budget: Not Specified

Site Visit: Anytime

Posted: 12 February 2019
Budget: $1,000
Surry Hills, NSW 2010

Hail damage repair and touch up paint work to my car

Specific Job Details:

Schedule: Need job done in the next couple of weeks

Budget: $1000 - $2000

Site Visit: Anytime

Posted: 12 February 2019
Budget: No set budget
South Hurstville, NSW 2221

Car has not been started in 8 months. Needs:
- engine oil & oil filter replacement
- front brake pads replacement
- brake fluid replacement
- new battery

Specific Job Details:

Schedule: Need job done on 03/05/2019 at 9:00 AM

Budget: Not Specified

Site Visit: Weekdays
Visit during: Business-hours

Posted: 11 February 2019
Budget: No set budget
Edenhope, VIC 3318

Edenhope Aged Care Redevelopment - Tender Commercial Works.
Need URGENT quotes back by next Tuesday please for this Major Commercial Project.
Send me your email address by reply on Service seeking and we will send you full working drawings to quote from.. Do not send Message via text with email address please
Please Note if you do not send your Email address we will not send you files, Also no Calls Please as we get Hundreds of calls a day that are un-necessary..
We will Send you full Drawings and files via We Transfer, Files are too large to access via mobile or tablet.

Specific Job Details:

Schedule: Need job done this week

Budget: Not Specified

Site Visit: Anytime

Posted: 11 February 2019
Budget: No set budget
Sydney, NSW 2000

mazda 3 2006 sp23

transmission fluid & fliter
oil filter/oil
engine decarb (got the can)
back brake pads/ fluid
plugs

Specific Job Details:

Schedule: Need job done this week

Budget: Not Specified

Site Visit: Weekdays
Visit during: Business-hours

Posted: 11 February 2019
Budget: No set budget
Dandenong, VIC 3175

For Construction – Dandenong West Primary School - Tender Commercial Works.
Need URGENT quotes back by next Tuesday please for this Major Commercial Project.
Send me your email address by reply on Service seeking and we will send you full working drawings to quote from.. Do not send Message via text with email address please
Please Note if you do not send your Email address we will not send you files, Also no Calls Please as we get Hundreds of calls a day that are un-necessary..
We will Send you full Drawings and files via We Transfer, Files are too large to access via mobile or tablet.

Specific Job Details:

Schedule: Need job done this week

Budget: Not Specified

Site Visit: Anytime

Posted: 10 February 2019
Budget: No set budget
Carramar, WA 6031

Pre Purchase inspection of a mazda3, 2012, auto.

Specific Job Details:

Schedule: Need job done this week

Budget: Not Specified

Site Visit: Anytime

Posted: 10 February 2019
Budget: No set budget
Chatswood, NSW 2067

please quote replace one terminal of battery cable.

Specific Job Details:

Schedule: Need job done on 11/02/2019 at 10:00 AM

Budget: Not Specified

Site Visit: Anytime

Posted: 09 February 2019
Budget: No set budget
Chatswood, NSW 2067

please quote Replace terminal of battery cables. Hyundai Elantra 2005 year.

Specific Job Details:

Budget: Not Specified

Site Visit: Anytime

Posted: 09 February 2019
Budget: No set budget
Keysborough, VIC 3173

[ This Customer has not provided a phone number. Only express interest if you're happy to correspond by message through the site. - Customer Support ]

Car service, tune up, brake pads change

Specific Job Details:

Need job done urgently

Site Visit: No site visit

Posted: 08 February 2019
Budget: No set budget
Edmondson Park, NSW 2174

2007 BMW 320i sedan auto please quote on removing engine and replace with another Cheers David .... R&R Cost

Specific Job Details:

Schedule: Need job done this week

Budget: Not Specified

Site Visit: Anytime

Posted: 08 February 2019
Budget: No set budget
Glenmore Park, NSW 2745

I need the spark plugs changed.
Nothing fancy. My Prius is showing a fault code and they need to be changed. Best to get it done ASAP.

Specific Job Details:

Schedule: Need job done this week

Budget: Not Specified

Site Visit: Anytime

Posted: 07 February 2019
Budget: No set budget
Carrum Downs, VIC 3201

Crate engine placed into honda odyssey rb1 2007 engine bay

Specific Job Details:

Schedule: Need job done urgently

Budget: Not Specified

Site Visit: Anytime

Posted: 07 February 2019
Budget: No set budget
Newstead, QLD 4006

Install soft cover tonneau for VW Amarok tray. Instructions indicate 1 hour install, tools required: 4.5mm drill bit and rivet gun.

Specific Job Details:

Schedule: Need job done this week

Budget: Not Specified

Site Visit: Anytime

Posted: 06 February 2019
Budget: No set budget
Redland Bay, QLD 4165

Im wanting someone to remove 2 leafs on each leaf pack of my 2008 vdj79 landcruiser. It currently has 800kg constant load spring which is way to much! Also have airbags too.. If you could come to me would be good, otherwise i can always come to you if local enouph.

Specific Job Details:

Schedule: Need job done this week

Budget: Not Specified

Site Visit: Anytime

Posted: 06 February 2019
Budget: No set budget
Edmondson Park, NSW 2174

2007 BMW 320I 2007 model[phone/email supplied] klms needs big end bearings replaced please give quote

Specific Job Details:

Schedule: Need job done this week

Budget: Not Specified

Site Visit: Anytime

Posted: 06 February 2019
Budget: $1
Essendon, VIC 3040

On 35 hp Out board boat engine to find and connect the wire going to the forward controls and make it to start and stop the engine from the controls

Specific Job Details:

Schedule: Need job done urgently

Budget: $1 - $100

Site Visit: Anytime

Posted: 06 February 2019
Budget: No set budget
Warrnambool, VIC 3280

Warrnambool Specialist Disability Accommodation - Tender Commercial Works.
Need URGENT quotes back by next Tuesday please for this Major Commercial Project.
Send me your email address by reply on Service seeking and we will send you full working drawings to quote from.. Do not send Message via text with email address please
Please Note if you do not send your Email address we will not send you files, Also no Calls Please as we get Hundreds of calls a day that are un-necessary..
We will Send you full Drawings and files via We Transfer, Files are too large to access via mobile or tablet.

Specific Job Details:

Schedule: Need job done this week

Budget: Not Specified

Site Visit: Anytime

Posted: 06 February 2019
Budget: No set budget
Greenbank, QLD 4124

Price to take en engine out of a Alfa Romeo Mito and put it into another Mito.

Specific Job Details:

Schedule: Need job done this week

Budget: Not Specified

Site Visit: Anytime

Posted: 06 February 2019
Budget: No set budget
Kelvin Grove, QLD 4059

Supplyand install coil spring airbags (suspension)

Specific Job Details:

Need job done within a few weeks

Site Visit: Any day
Visit during: Anytime

Posted: 05 February 2019
Budget: No set budget
Tennyson, QLD 4105

Car is Honda Odyssey year 2011
Need to replace rear brake pad and disc machine

Need qoute for supply and install.

Specific Job Details:

Schedule: Need job done this week

Budget: Not Specified

Site Visit: Anytime

Posted: 04 February 2019
Budget: $100
Wishart, QLD 4122

Remove existing suspension on 2011 Hilux SR D/C 4x4, and replace with standard suspension, incl, front struts; rear springs; rear shackles; rear shock absorbers. I have purchased a standard Hilux suspension, and the front struts are already complete.

Specific Job Details:

Schedule: Need job done in the next couple of weeks

Budget: $100 - $500

Site Visit: Anytime

Posted: 04 February 2019
Budget: $200
Hamilton Hill, WA 6163

Vt commodore leaking transmission fluid from radiator after radiator replaced with second hand one. Car not going into gear.

Specific Job Details:

Schedule: Need job done this week

Budget: $200

Site Visit: Anytime

Posted: 04 February 2019
Budget: No set budget
Mitchelton, QLD 4053

255/35 R19 92Y rear run flats x 2
225/40 R19 89Y front run flats x 2
fitted

Specific Job Details:

Schedule: Need job done this week

Budget: Not Specified

Site Visit: Anytime