12,517Jobs Listed So Far

Posted: 21 June 2021
Budget: $2000 - $5000
Lynbrook, VIC 3975

Require floating floorboards installed

-Supplied and installed in 1 living + 1 dining + 1 kitchen + 2 hallway areas (~62 m2)

- Floorboards to be installed over tiles in most areas (front hallway, dining and kitchen areas).

- Living and 2nd hallway areas currently have carpet. Therefore, old carpet will need to be removed, area refilled to correct level height, and floorboards then installed.

- Floorboard colour/type we are looking for = Canadian Warm Oak hybrid 6mm (https://bleflooring.com.au/shop-1/hybrid-vinyl-planks-floor/calm-walk/canadian-warm-oak-splendid-hybrid/)

- Refer to image of floorplan attached with measurements of each room/hallway.

Specific Job Details:

Schedule: Not Specified

Budget: $2000 - $5000

Site Visit: Anytime

Posted: 20 June 2021
Budget: No set budget
Glenwood, NSW 2768

Customer name: Bhishma
Job location: 2768
Date required: within the next few days.
Job type: Residential
Flooring type: Carpet
No. of rooms: 3
Site visit: A site visit is OK to assist quote

Bhishma's comments: Carpet replacement upstairs 3 rooms and staircase.

Call me after 12 pm if required.

CONTACT PREFERENCES
- Email Only Please

Posted: 20 June 2021
Budget: No set budget

Remove carpet and polish hardwood flore.

Specific Job Details:

Schedule: Need job done in the next couple of weeks

Budget: Not Specified

Site Visit: Weekends
Site Visit: Evenings

Posted: 20 June 2021
Budget: $100 - $500

I need vinyl in kitchen replaced

Specific Job Details:

Schedule: Need job done in the next couple of weeks

Budget: $100 - $500

Site Visit: Weekdays
Site Visit: Evenings

Posted: 20 June 2021
Budget: No set budget

Would like to get existing floors sanded and re vanished. Current floors are vanished and scratched

Specific Job Details:

Schedule: Need job done in the next couple of weeks

Budget: Not Specified

Site Visit: Weekends
Site Visit: Anytime

Posted: 20 June 2021
Budget: No set budget

Garage floor renovation, either tiles or epoxy or other recommended nice finish.

Specific Job Details:

Schedule: Need job done in the next couple of weeks

Budget: Not Specified

Site Visit: Anytime

Posted: 20 June 2021
Budget: No set budget
Buderim, QLD 4556

Hi, we have a small gym (83m2) that requires the current carpet to be lifted and vinyly (8mm) applied. The vinyl is already ordered and due to be delivered in late July. Please do not quote to supply the vinyl, just the laying and removal of carpet. Thanks :)

Specific Job Details:

Schedule: Not Specified

Budget: Not Specified

Site Visit: Anytime

Posted: 20 June 2021
Budget: No set budget
Narre Warren, VIC 3805

Sanding and polishing wooden floor in one room

Specific Job Details:

Schedule: Need job done in the next couple of weeks

Budget: Not Specified

Site Visit: Anytime

Posted: 20 June 2021
Budget: No set budget

Sanding and polishing wooden floors in one room

Specific Job Details:

Schedule: Need job done in the next couple of weeks

Budget: Not Specified

Site Visit: Anytime

Posted: 19 June 2021
Budget: No set budget

Need a quote to install approx. 90m2 click lock laminate flooring 14mm.

Specific Job Details:

Schedule: Not Specified

Budget: Not Specified

Site Visit: Anytime

Posted: 19 June 2021
Budget: $2000 - $5000

50sqm of hybrid flooring for the kitchen and living area

Specific Job Details:

Schedule: Need job done in the next couple of weeks

Budget: $2000 - $5000

Site Visit: Anytime

Posted: 19 June 2021
Budget: No set budget

Install the laminate flooring in the hallway, about 6sqm

Specific Job Details:

Schedule: Need job done in the next couple of weeks

Budget: Not Specified

Site Visit: Anytime

Posted: 19 June 2021
Budget: No set budget
Thornleigh, NSW 2120

We want to replace the carpet on our stairs and upstairs (three bedrooms) probably with flooring similar to our downstairs flooring (see pictures of downstairs and floor plan of upstairs). We are hoping to get our place painted in mid July. Happy to discuss timing for the carpet to be replaced.

Posted: 18 June 2021
Budget: $1 - $100
Clayton, VIC 3168

There is a part broken in the vinyl floor. I am seeking help to get it repaired or replaced. Thank you.

Specific Job Details:

Schedule: Not Specified

Budget: $1 - $100

Site Visit: Anytime

Posted: 18 June 2021
Budget: No set budget

Looking for someone who can supply and install vinyl flooring

Specific Job Details:

Need job done this week

Site Visit: Any day
Visit during: Anytime

Posted: 18 June 2021
Budget: No set budget

We have nearly 450m of vinyl tiles and carpet tiles needing to be installed in various rooms around the building

Specific Job Details:

Schedule: Not Specified

Budget: Not Specified

Site Visit: Weekdays
Visit during: Business-hours

Posted: 18 June 2021
Budget: No set budget

Need to resand and polish (3 coats) and make scratch resistant wooden floors in 2 rooms. Family Area approximately 32 m2, upstairs rumpus approximately 33 m2, the staircase (approx 18 steps and the balustrades). Best to do free measure and quote by site visit

Specific Job Details:

Schedule: Not Specified

Budget: Not Specified

Site Visit: Anytime

Posted: 17 June 2021
Budget: $2000 - $5000

To supply and install 80m2 Vinyl plank

Specific Job Details:

Schedule: Need job done in the next couple of weeks

Budget: $2000 - $5000

Site Visit: Weekdays
Site Visit: Evenings

Posted: 17 June 2021
Budget: $1 - $100

A small part of the vinyl floor in the bathroom is broken. I would like to seek help to repair it or change it to a new one? Many thanks in advance.

Specific Job Details:

Schedule: Not Specified

Budget: $1 - $150

Site Visit:

Posted: 17 June 2021
Budget: No set budget

We are after a floor sander for our hardwood floors. Approx 60m of mixed hardwood requiring sanding and oiling. Half the house is existing and half is new floorboards from an extension.

Specific Job Details:

Schedule: Not Specified

Budget: Not Specified

Site Visit: Anytime

Posted: 17 June 2021
Budget: No set budget

Floor sanding and lacquering in a matt finish. 11.5 sqm

Specific Job Details:

Schedule: Not Specified

Budget: Not Specified

Site Visit: Anytime

Posted: 17 June 2021
Budget: No set budget

I need to make my timber floor to shine. Is it possible? Cn they be polished? If yes how much?

Specific Job Details:

Schedule: Need job done in the next couple of weeks

Budget: Not Specified

Site Visit: Anytime

Posted: 16 June 2021
Budget: No set budget

Fix squaky floor under carpet without removing carpet if possible in one room

Specific Job Details:

Need job done within a few weeks

Site Visit: A weekend
Visit during: Anytime

Posted: 16 June 2021
Budget: No set budget

To be done some time in August.
Site visits: 9am - 3pm Mondays OR Fridays

Take up and dispose of approximately 70m2 of 400x400mm tiles.

Grind/skim coat the subfloor and then lay approximately 125m2 of plank-style flooring. We haven't settled on the flooring yet (we're thinking vinyl or hybrid) so if installing different types costs differently, please specify.

Also, if you can supply a plank style similar in colour & pattern to Gerflor Senso Natural Lord (at Bunnings) except larger, please bring a sample to the site visit.

Specific Job Details:

Schedule: Not Specified

Budget: Not Specified

Site Visit: Weekdays
Visit during: Business-hours

Posted: 16 June 2021
Budget: No set budget

Take up and dispose of approximately 70m2 of 400x400mm tiles.

Grind/skim coat approximately 125m2 of subfloor then install wooden plank-style flooring. We haven't bought the flooring yet (we're thinking vinyl or hybrid) so if installing different types are quoted differently, please specify.

Additionally, if you can supply flooring similar in colour/pattern to Gerflor Senso Natural Lord (at Bunnings) except larger planks, feel free to bring a sample to the site visit.

Work to be performed some time in August.

Posted: 16 June 2021
Budget: $1000 - $2000
Stafford, QLD 4053

We have approximately 60m of hardwood flooring that needs sanding/oiling. Half of the floor is the original floor and half is a new extension (all mixed hardwood). It’s a living/dining area and a hallway.

Specific Job Details:

Schedule: Need job done in the next couple of weeks

Budget: $1000 - $2000

Site Visit: Anytime

Posted: 16 June 2021
Budget: No set budget

Roughly 40m2 between 3 rooms just resend engineered wood flooring with lacquer on thanks Nigel .Phone[phone/email supplied]

Specific Job Details:

Schedule: Need job done in the next couple of weeks

Budget: Not Specified

Site Visit: Weekends
Site Visit: Anytime

Posted: 16 June 2021
Budget: $500 - $1000

3 BR, a rumpus and a living area. Needs floor sanding, coating three coats polyurethane varnish. An inspection of the job is preferred for exact requirements.

Specific Job Details:

Schedule: Not Specified

Budget: $500 - $1000

Site Visit: Anytime

Posted: 16 June 2021
Budget: No set budget
Indented Head, VIC 3223

URGENT
Hi I need L shape lounge and dining hardwood floors sprucing up with a sand and polish. Don't need stripping right back but just a quick freshen if possible as will be renovating soon.
Many thanks

Specific Job Details:

Schedule: Need job done in the next couple of weeks

Budget: Not Specified

Site Visit: Weekends
Site Visit: Anytime

Posted: 15 June 2021
Budget: No set budget

I am looking for good and reasonable tiler who can do flooring around 74m2 area of floor in living, dining, kitchen and lounge room. I wanna put 600x1200 porcelain tiles. we also need to remove existing tiles 300x300 which is around 20 years old which was directly installed with glue on concrete base and which is easy to remove.
Thanks in Advance

Specific Job Details:

Schedule: Not Specified

Budget: Not Specified

Site Visit: Anytime