1,881Jobs Listed So Far

Posted: 18 January 2020
Budget: No set budget

Hi All, I would like to have a room Extended above the roof joining from the lower level as show in the photo attached below (PLEASE SEE ATTACHMENTS), also I needed to knock down some internal walls and I need create a Slinging Entry/Exit door to the kitchen. Before I can do this I needed Drafting to draw up for plan and permit. Could you please kindly give me a quoting price for the drawing drafting.

Thanks.

Posted: 16 January 2020
Budget: No set budget

Detail drawings in Melbourne for a Gym space 1000sqm, one level.

Specific Job Details:

Schedule: Not Specified

Budget: Not Specified

Site Visit:

Posted: 16 January 2020
Budget: $2,000

We are renovating existing home and need drawing done. We have designed it and have rough drawings already. Planning to keep our costs down as much as possible.

Specific Job Details:

Schedule: Need job done in the next couple of weeks

Budget: $2000

Site Visit: Anytime

Posted: 16 January 2020
Budget: $5,001

I would like to build a double garage with a large storage cupboard and garden wall/fence at the front of our existing property. It will be a standalone structure away from the house. There is a natural fall of ground from the house down to the location of the proposed garage so we would like to explore any options to grade the garage down so that it has less of an impact on the view from the front of the house. However, there is not that much space to get the gradient to come down. There is also an easement (gas line) on the adjacent side of the land where the garage is to be built that precludes us from building anything within 1 metre of it but we would still like a wall/fence to close off the front garden for our child. So we would need some sort of gate, or easily removable paneling to get around this.

Specific Job Details:

Schedule: Need job done in the next couple of weeks

Budget: More than $5000

Site Visit: Anytime

Posted: 15 January 2020
Budget: No set budget

Dear Sir’s,

IESHAHOMES is seeking engineering drafting and detailing including shop plans to be completed for our small home designs for Australia and New Zealand. We need the work done asap and have the designs and much knowledge to support you with drafting. We have built several of our larger boxed steel homes but have changed our business to service small homes only.

Our system is module. We have a 700 series design (which) is module (our smallest). To achieve a larger dwelling we use 2 x 700 series (2 modules connected) = our 1000 series model.

The smallest (700) series is 2.7mw x 6mL meters x 3.2mh.

We need engineering and shop plans for both Australia and New Zealand markets. We are going to export into NZ to begin with from Australia.

We are also interested in the fabrication and supply.

Can you please contact me asap to discuss the above.

Thank You

Jon Benelle
Director

Please see POD designs at our website address shown below.

Specific Job Details:

Schedule: Not Specified

Budget: Not Specified

Site Visit:

Posted: 14 January 2020
Budget: No set budget

Addition of carport to front fence line from existing built in garage, incorporating rebuild of carport on side of house

Specific Job Details:

Schedule: Not Specified

Budget: Not Specified

Site Visit:

Posted: 13 January 2020
Budget: No set budget

Adjoining ensuite and WIR combined to create a single ensuite bathroom.

Specific Job Details:

Schedule: Need job done in the next couple of weeks

Budget: Not Specified

Site Visit: Anytime

Posted: 13 January 2020
Budget: No set budget

I need a draftsman to sketch up a detached garage for our house and then lodge to council/certifier, will be a simple 3 car garage, a site visit will be required to check measurements and exact location, job is ready to go

Specific Job Details:

Schedule: Not Specified

Budget: Not Specified

Site Visit:

Posted: 13 January 2020
Budget: No set budget

Draw up for council ,verandah posts beans and rafters for covering around building

Specific Job Details:

Schedule: Need job done in the next couple of weeks

Budget: Not Specified

Site Visit: Anytime

Posted: 12 January 2020
Budget: No set budget

Draftsman needed - need Parramatta council approval - siteplan/elevations/crossection for kitchen extension - 13.5sqm to 23.5sqm

Specific Job Details:

Schedule: Need job done in the next couple of weeks

Budget: Not Specified

Site Visit: Anytime

Posted: 12 January 2020
Budget: No set budget

Looking for Architectural Drafter/ Documentor for high end Residential Architecture.

Must be efficient, organised and have a design sensibity. Experience in preparing Town Planning, Construction Drawings and architectursl details essential.

Specific Job Details:

Need job done within a few weeks

Site Visit: A weekday
Visit during: Business hours

Posted: 10 January 2020
Budget: No set budget

Carport, 6X5.9, dutch gable ends, colorbond roof, trussed roof,
cement sheet ceiling, pitching beams at one end cantilevered
by 1 metre

Specific Job Details:

Schedule: Need job done in the next couple of weeks

Budget: Not Specified

Site Visit: No site visit required

Posted: 10 January 2020
Budget: No set budget

Looking to get house plans drawn up for a property at Gearside street, Everton park. At the moment we are thinking the attached plans are what we’ll go with! No hand drawn plans please as we need to use them to engage engineering/ house raiser and building certifer. We are wanting to move house about .5meter and raise to build under! Slope of block is about 600mm from front to back of house.

Specific Job Details:

Need job done this week

Site Visit: Any day
Visit during: Evenings 5pm onwards

Posted: 10 January 2020
Budget: No set budget

modular house on stumps relocated to adjoining block linked by walkway to existing 1940s highset house in Rosewood (Ipswich) Qld

Specific Job Details:

Schedule: Not Specified

Budget: Not Specified

Site Visit:

Posted: 09 January 2020
Budget: No set budget

[This is a reposted job with more information provided for a more accurate quote]
Draw up a granny flat plan similar to the illustration, please.

Specific Job Details:

Schedule: Not Specified

Budget: Not Specified

Site Visit:

Posted: 07 January 2020
Budget: No set budget

Commercial shop detailing of 3 or 4 beams, install concrete floor, electrical and plumbing

Specific Job Details:

Schedule: Need job done this week

Budget: Not Specified

Site Visit: Anytime

Posted: 07 January 2020
Budget: No set budget

Need to turn existing bathroom into ensuite, add new bathroom and new laundry

Specific Job Details:

Schedule: Not Specified

Budget: Not Specified

Site Visit:

Posted: 06 January 2020
Budget: No set budget

Install a new staircase and draw plans for a future extension for approvals and certification

Specific Job Details:

Need job done within a few weeks

Site Visit: Any day
Visit during: Anytime

Posted: 05 January 2020
Budget: No set budget

I want to extend my house with one extra bedroom.
The first thing is to get a drafting

Specific Job Details:

Schedule: Need job done in the next couple of weeks

Budget: Not Specified

Site Visit: Weekends
Visit during: Anytime

Posted: 02 January 2020
Budget: No set budget

Hi,

I am lodging a DA to Bayside Council for a new two storey dwelling and require a concept stormwater drainage plan.
The site slopes towards the rear of the site (see attached survey for reference).

Please email through a quote for your services (please no phone calls as I am out of state)

Specific Job Details:

Schedule: Need job done in the next couple of weeks

Budget: Not Specified

Site Visit: No site visit required

Posted: 02 January 2020
Budget: $5,001

I'm in Melbourne, and own a 2 bed 1 bath single storey, single fronted terrace.

I'd like to extend the home, with a second storey, 3rd bedroom with semi ensuite.

If you can assist, pls call me on[phone/email supplied]

Regards, dolly

Specific Job Details:

Schedule: Need job done in the next couple of weeks

Budget: More than $5000

Site Visit: Anytime

Posted: 02 January 2020
Budget: No set budget

Finalise plans for three farmstay units and a farm cottage, base designs already done in CAD but they need to be brought at a standard for a construction certificate

Specific Job Details:

Schedule: Need job done in the next couple of weeks

Budget: Not Specified

Site Visit: No site visit required

Posted: 02 January 2020
Budget: No set budget

Need Drawings or blue print for pergola or verandah which we want to get it done, quotes please.

Many Thanks
Raghu

Specific Job Details:

Schedule: Not Specified

Budget: Not Specified

Site Visit:

Posted: 31 December 2019
Budget: No set budget

I am looking to get some plans drawn up to build a single story home in Madora bay

Specific Job Details:

Schedule: Need job done in the next couple of weeks

Budget: Not Specified

Site Visit: Anytime

Posted: 31 December 2019
Budget: No set budget

Building a granny flat / workshop and need drawings to submit with DA to council

Specific Job Details:

Schedule: Need job done in the next couple of weeks

Budget: Not Specified

Site Visit: Anytime

Posted: 28 December 2019
Budget: No set budget

Plans to build a rooming house in frankston

Specific Job Details:

Schedule: Need job done in the next couple of weeks

Budget: Not Specified

Site Visit: Anytime

Posted: 19 December 2019
Budget: $100

Drafting of a design plan for council approval of the kitchen and restaurant seating space specific to food industry - with equipment’s, and other details

Specific Job Details:

Schedule: Need job done in the next couple of weeks

Budget: $100 - $500

Site Visit: Anytime

Posted: 19 December 2019
Budget: No set budget

Certified Draftsman for creating a draft for simple and straightforward house extension.

Specific Job Details:

Schedule: Not Specified

Budget: Not Specified

Site Visit:

Posted: 16 December 2019
Budget: $5,001

A shed plan to my design.

Specific Job Details:

Schedule: Need job done in the next couple of weeks

Budget: More than $5000

Site Visit: No site visit required

Posted: 16 December 2019
Budget: No set budget

Hi There,
We need drawings prepared for Knox city council fence height increase application. This is for 1.8 m high Colorbond type of fence. We are not sure what exact drawings need to be present for council to review Can you do this work, how long it may take and how much it may cost? You can contact us on[phone/email supplied] or via e-mail [phone/email supplied]
Thank you,
Slava

Specific Job Details:

Schedule: Need job done in the next couple of weeks

Budget: Not Specified

Site Visit: Anytime