we need signage designed, supplied and installed for a medical clinic.
self illuminated or flood lit option.

Specific Job Details:

Schedule: Flexible

Budget: Not Specified

Site Visit: Anytime

Need a signboard done approx. 6 meter long and 60cm width
Lots of big stikers for glasses and others area outside

Specific Job Details:

Schedule: Not Specified

Budget: Not Specified

We need urgent quote on 2 commercial signs, read below.
1 x Illuminated slim light box ceiling hung. 1500mm long x 500mm high x 50mm thickness. Wrapped in a gold look colour and seen all round including the back, this will have opal letters protruding about 10mm with a gold vinyl face to letters.
1 x 6mm opal acrylic letters only with gold vinyl face non illuminated direct stuck to back wall.
We have the existing logo and wording which needs to be duplicated as there is no current art work folder.

Specific Job Details:

Schedule: Not Specified

Budget: Not Specified

I need someone to hang up 8 meter of signs at the top our shop in Pooraka. Signs are allready produced and ready to go, just need someone to hang them up.

Specific Job Details:

Schedule: Need job done in the next few weeks

Budget: Not Specified

Site Visit: Anytime

Design layout of 250 page memoir with photos for printing as a book for family. Will be supplied as a digital file.

Specific Job Details:

Schedule: Need job done in the next few weeks

Budget: $500 - $1000

Site Visit: No site visit required

Fascia - Left Side
550mm High x 2.73m Long

Fascia - Front
550mm Hight x 6m Long

Top Board
2400mm x 1200mm
Noting there are 2 sides

All on metal
Artwork done

Specific Job Details:

Schedule: Flexible

Budget: Not Specified

Site Visit: Anytime

I need a quote to design and print 3 x "You are here" signs for a building complex in Bundoora.
image attached for reference.

Specific Job Details:

Schedule: I’m flexible

Budget: Not Specified

Site Visit: Anytime

I’m looking to get a quote for one outdoor sign with the below specs:

• Size: 3600mm (W) x 1300mm (H)
• Material: Aluminium
• Thickness: 3mm (please confirm if suitable for this size)
• Finish: Matte black powder coat (low sheen)
• Logo: White logo on black – please advise best method (vinyl vs cut-out)
• Holes: Pre-drilled, evenly spaced (countersunk preferred)
• Edges: Smooth with slightly rounded corners

This will be mounted above a roller door, so it needs to stay flat and handle outdoor conditions.

Could you please provide:
• Price
• Lead time
• Recommendation if a backing frame is needed for strength

Specific Job Details:

Schedule: I’m flexible

Budget: $1000 - $2000

Site Visit: Anytime

Hi, I’m looking for an experienced handy man to remove an existing sign and repaint the affected area in Morley.

Job Scope:
• Remove existing signage
• Patch/repair surface if needed
• Repaint the area to a clean finish

Requirements:
• Must have own tools
• Experience with sign removal and repainting preferred
• Must hold Public Liability Insurance (minimum $20M)
• Reliable and able to complete the job safely

Location: Morley
Timing:Available from Tuesday to Sunday next week, preferably in the early morning or late afternoon 6pm

Please DM me with your experience, availability, and quote.

Specific Job Details:

Schedule: Flexible

Budget: Not Specified

Site Visit: Weekdays

O have changed the logo of my business amd want to have tje new artwork in the ligjt box

Requite x2 40mm round light box inserts
Printed in colour with my logo

See picture - is the black lohjt box

Specific Job Details:

Schedule: Need job done urgently

Budget: Not Specified

Site Visit: Anytime

Hi there , i need 3 signs similar to the ones in the photo on top of a fridge case top to bottom. Installlation required too

Specific Job Details:

Schedule: Flexible

Budget: Not Specified

Site Visit: Anytime

Brochure to be designed and print out for a new business

Specific Job Details:

Schedule: Need job done urgently

Budget: Not Specified

Site Visit: Weekdays
Site Visit: Evenings

Ricoh mpc 2003 printer sc860-00 error code relate with hard disk. need repair or replacement

Specific Job Details:

Schedule: I’m flexible

Budget: $1 - $500

Site Visit: Weekdays
Site Visit: Business hours

We require stickers / old logos removed from approx. 30 Generators / Compressors. Location Archerfield. Would like to have this done preferably Wed / Thurs & Friday this week.

Specific Job Details:

Schedule: Not Specified

Budget: Not Specified

Site Visit: Weekdays
Site Visit: Business hours

Hello,
We operate a franchise beauty salon in Chatswood and require new signage to be made, as per the attached specifications from Head Office.
Please contact me if you have any questions.

Ali
[phone/email supplied]

Specific Job Details:

Schedule: I’m flexible

Budget: Not Specified

~> *I urgently seek / require written embroidery for 6 team related polo tops.

My names Alby & my mobile # is[phone/email supplied].

~ *I urgently seek / require gold coloured embroidery (as i'm essentially basically just after a one basic type of colour embroidery stitching only) in just letters needed for names (well nicknames actually that will be on the back of 6 polo tops. 12 characters is the longest length of nickname on one of my tops. And every other one of the 5 other tops are nicknames that I need are maximum 7 character letters for on just one of those tops. And one other top nickname is 6 characters).

I need the embroidery done on black rectangular patches that I will provide. And i'm after pretty much a Monotype Corsiva style writing lettering for the appearance of each nickname for each respective corresponding nickname to appear on the back of each individual 6 seperate team top that I need done.

And I do need each embroidery patch to be located beneath an already on my back of all tops team name, -where I then need my deep gold but still a bit bright one type of gold coloured Monotype Corsiva styled embroidery stitch to be spaced / centred a few centimetres down from my team name, maybe positioned up to 5 centimetres lower than than the team name that I already have right up the top of all the back of all 6 team tops.

And the embroidery stitched patch itself of each nickname then this does need to be individually centred right below my team name (so that there's the exact even spacing on both the left & right far ends of the label patch itself that is evenly centred proportioned to fit below the team name so everything looks professionally aligned).

And then each label patch itself does need to finally & ultimately be strongly secured by stitch work all around the outside rectangular perimeter of each patch itself so that it's all strongly secured as stitch work hemmed into the 100% thin polyester mater that my team tops material are made from.

~ *So I might & most probably will also need some sturdy backing material to be also stitched into the inner / inside of each polo top. ~ *So this will need to be on the other side of the rectangular label itself, -on the inside of the top, -by turning each top inside out & put exactly over the very back of the label patch itself, -to effectively & efficiently provide me with a very most secure firm backing over the full length & area circumference of the entire label patch itself, so as to ensure that I do have solid, firm, solid, rigid stable backing protection & so that this won't pull, fray or tear away at & or from any or all of the stitching seems themselves that will be holding down firmly, securely & in a safe long sustainable / permanent manner, -with great concern, care & regards when it comes specifically to each black rectangular patch itself, -to properly in a professional way, -affix & secure each label patch to the back of each of the 6 polo team tops below the above eight ball pool team name that's on the very top of the back of all 6 (back of polo team tops). ~ Where all 6 label patches do need to be perfectly centred / positioned to be both left & right aligned right beneath the above team name. ~ And this is all to be applied onto polyester material. ~ *And of course I don't want (& cannot afford any damage disasters to occur) -whereby I don't at all want a situation arising where the label patches themselves where ever to come apart, or end up causing any damage whatsoever to any of the polyester material surrounding it, -once it's stitched onto the back of each 6 team top, -that of course the 100% thin polyester material of each top will be fully surrounding the label patch itself. ~ *As naturally or obviously I really do need all that handled with the upmost of great careful safe care (handled with the most extreme of great safe care & professionalism) on the back of each 6 polo tops.

~> *And so that's pretty much the full extend of work that I need / require done (without any need for any logo embroidery, or nothing at all extra. So just only what i've fully described. ~ *Which of course is just one line worth of various individual nicknames to be embroidery stitched / embroidered onto black provided rectangular patches (that I will supply & provide, -I can send to your working address together with each 6 of the polo tops) & then of course I will need them fully safely & professionally stitched in with backing (all as explained further above).

~ *And of course I'm looking for the very lowest / cheapest possible quote for this work to be done per each of the 6 tops, -or the lowest possible total charge cost for the work I require to be done for all 6 tops.

~ *And furthermore, I would really most like to get the stitch work, to be all done in as thick as possible bold stand-out gold coloured embroidery letter writing for all 6 tops on the back of them where I need the embroidery done on them.

~ *If you personally specifically do sight / view my supplied / attached gold colour image example of the type of style writing i'm after getting / looking to achieve & also as an example of the gold colour itself, -which tbh if the gold colour could be a little bit deeper / richer in bold deep but still not too dark & relatively bright gold colour, -then that will be a better (100% best gold colour for the writing / embroidery lettering that i'm most after wanting to achieve in the gold colour itself).

Thank you in advance to whomever can best assist me with all this. And do please do feel free & not hesitate to contact me via text msg of my mobile # to let me know if you can best help me actually professionally & safely do all this for 6 of my tops & do give me your quote (what will be your lowest best possible cost charge price per top, or for all 6 tops in total).

So i'm most keen to hear back from whomever can best assist me with all this & as ASAP as possible to.

Kindest of regards, Alby.

P.s: I’m looking for a most fair cheapest lowest cost price for embroidery stitch work to be done to all 6 100% polyester team based tops of mine. And I do live in Ivanhoe, -but i’m very happy & willing to travel to most places, -anywhere probably within reason. So say probably up to an hour out / away from Ivanhoe, -to personally bring my polo team tops in, plus black rectangular label patches to an embroidery practice service to get the work done for myself.

Specific Job Details:

Schedule: Need job done urgently

Budget: $90

Site Visit: Anytime

Relocated the sign tto be more visible for street view and also update the sign as the information is outdated

Specific Job Details:

Schedule: Flexible

Budget: Not Specified

Site Visit: Anytime

ready made signage needs to be hung on the warehouse. it may require high scissor lift to do the job. pls see photos. pls send quotes via sms only

Specific Job Details:

Schedule: Need Job done urgently

Budget: Not Specified

Site Visit: Anytime

Possible high definition logo redone and printed on large corflute signs for advertising

Specific Job Details:

Schedule: Need job done urgently

Budget: Not Specified

Site Visit: None