Hi there I’m looking for a structural engineering I just wanted to get a quote removing walls in the kitchen areas pantry cupboards, remove the wall where oven is sitting and wall next to stove and under kitchen tops remove the brick walls thanks
Specific Job Details:
Schedule: I’m flexible
Budget: Not Specified
Site Visit: Anytime
Engineer inspection of an existing wall the customer describes as a retaining wall, showing leaning or bulging (customer unsure which). Needed ASAP. Customer's photo appears to show a corrugated metal sheet structure about 1.8-2 m tall with a collapsed timber post leaning into the sheeting. Customer is unsure whether it holds back soil or is a standalone fence. Height and length to be confirmed on site, and the engineer is to advise on check or repair.
Specific Job Details:
Schedule: Need job done urgently
Budget: Not Specified
Site Visit: Anytime
Seeking a Victorian registered structural and civil engineer for an independent review of existing drawings and calculations, Reg 126 design certification, and signed protection work letter and report for a building surveyor and ongoing Building Appeals Board review.
Please provide a fixed-fee quote and availability. Preferred completion: 18 November 2026.
Specific Job Details:
Schedule: Not Specified
Budget: Not Specified
Looking for an experienced structural engineer to inspect an existing house in Denistone and provide independent advice.
Scope includes:
• Assess the accessible house structure, foundations and timber floor framing, identifying any defects or repairs required.
• Inspect an existing retaining wall and advise on repair or replacement, plus a proposed extension to support a widened driveway and vehicle loads.
• Advise whether a geotechnical assessment is required given the sloping site.
Initially seeking a site inspection and written report with practical, cost-effective recommendations to help decide the extent of renovations.
Please provide your qualifications, relevant experience, inspection/report fee and earliest availability.
Specific Job Details:
Schedule: Flexible
Budget: Not Specified
Site Visit: Anytime
Structural engineer required to assess and certify the removal of two load-bearing walls in a house built in the 1970s-1990s. Customer has plans of the house. Engineer to advise on whether a new beam is required to carry the load; customer unsure. Just the two walls, no other structural work (no rear extension or roof changes). Timing: ASAP.
Specific Job Details:
Schedule: Need job done urgently
Budget: Not Specified
Site Visit: Anytime
Draftsman required to prepare engineering plans and a Form 15 for converting a single 20ft standard shipping container, already on site, into a skin clinic with a reception area and treatment rooms. Timing: ASAP.
Specific Job Details:
Schedule: Need job done urgently
Budget: Not Specified
Site Visit: Not Required
Structural approval and engineering for a new retractable awning to be attached to a 250x90 PFC along the edge of a strata townhouse/unit. Awning projects 2m from the eave. Strata approval already given. What the PFC is fixed to is not known; to be confirmed on site. Customer is just researching, no set timeframe. Projection of 2m is the customer's figure, to be confirmed on site.
Specific Job Details:
Schedule: I’m flexible
Budget: Not Specified
Site Visit: Anytime
I am building a shed and already have a building permit with approved design however the Municipal Building Surveyor has required me to get an engineers review of the slab and advise if any changes are required. The shed is 4mx5m class 10a building.
Specific Job Details:
Schedule: Not Specified
Budget: $500 - $1000
Site Visit: Anytime
Conduct a site Site inspection and provide a formal forensic engineering report from a CPEng / NER engineer for a severe and immediate structural hazard to my home caused by a neighbour's encroaching and un-shored construction works for a retaining wall that Counil has now ordered demolished.
I have attached a detailed Engineering Expert Brief, but a high-level summary of the site parameters is as follows:
• The Hazard: A 2.5-metre vertical cut encroaching on my property and running directly along my shared property boundary, which sits a mere 1.0 metre from the load-bearing foundations of my two-storey residential dwelling.
• Current Status: Works on the adjoining site ceased 14 months ago (August 2025) and have been abandoned since. An unverified, un-backfilled core-filled block retaining wall stands in the cut.
• Critical Technical Concerns: The excavation completely penetrates the 1:1 structural Zone of Influence (ZOI) of my home. Over the past 14 months, the site has suffered severe drainage failure, causing water pooling and hydrostatic pressure behind the wall, leading to progressive soil movement and physical damage to my property's paved pathways and landscaping.
Scope of Work Required:
We require a formal Structural/Geotechnical Assessment Report that carries necessary legal weight for submission to Campbelltown City Council, NSW Fair Trading, NSW Building Commission, NSW SafeWork, and legal representatives for use in court. The report must map out the existing damage, establish the exact zone of influence/failure plane relative to my footings, evaluate hydrostatic risks, and provide professional remedial directions to make the boundary safe prior to, during and after the demolition of the encroaching retaining wall.
Please review the attached brief and advise on:
1. Your earliest availability for an on-site inspection.
2. An estimated fee proposal/quote for the inspection and preparation of the expert report.
3. Confirmation that the inspecting and signing engineer holds CPEng / NER registration.
Time is of the essence as this matter is being actively escalated to regulatory compliance authorities.
Specific Job Details:
Schedule: Not Specified
Budget: Not Specified
Site Visit: Anytime
Seeking engineer to provide M19 Hydraulic compliance certificate. Residential dwelling was completed post 2 years ago.
Specific Job Details:
Schedule: I’m flexible
Budget: Not Specified
Site Visit: Anytime
Need extension to existing balcony- want structural engineer plans . Want to use i beans and attach them to house and existing balcony
Specific Job Details:
Schedule: I’m flexible
Budget: Not Specified
Site Visit: Anytime
The distance between gum tree and the wall is 2.1 meter. I need a report from structural engineer to show the relationship between cracks on the wall the tree root in Viewbank.
Specific Job Details:
Schedule: I’m flexible
Budget: Not Specified
Site Visit: Anytime
I already have a design for 24 concrete stumps in concrete pads with 3 rows of 8. Bearers are 240mm by 45mm LVL and joists are 190mm by 45mm. This supports a 12m by 6M lightweight steel framed house on flat class A soil. I have the soil test and the ifc file for the house frame. I need to have the foundation design signed off for council approval.
Specific Job Details:
Schedule: I’m flexible
Budget: Not Specified
Energy assessments
Certificate of Design compliance (for building permit application)
Soil Test
Structural Engineering documents
Specific Job Details:
Schedule: Not Specified
Budget: Not Specified
I need someone to do the drawings for a permit for a 1.6 m high by roughly 4 m wide retaining wall
Specific Job Details:
Schedule: Flexible
Budget: Not Specified
Site Visit: Anytime
structural engineer to determine wall is load bearing, then a report and drawing to remove and potential beam.
site visit required
Specific Job Details:
Schedule: Flexible
Budget: $200-$500
Site Visit: Anytime
Structural Engineer Concrete Sleeper Retaining Wall
Specific Job Details:
Schedule: Need job done urgently
Budget: Over $1000
Site Visit: None
to prepare and provide details of the internal drainage network for subdiveded land for two lots
Specific Job Details:
Schedule: I’m flexible
Budget: Not Specified
Site Visit:
Structural engineer needed for a garage conversion to living space. Wanted ASAP. Garage size given as 40 (assumed sqm, to be confirmed on site). Extent of work to the existing slab and walls to be confirmed on site.
Specific Job Details:
Schedule: Need job done urgently
Budget: Not Specified
Site Visit: Anytime
Engineer plan to reference the new lift, confirming the basement slab will support the new lift. The existing 1st floor joists will be cut to create a void for the new lift. This will require additional structural works to the floor joists to allow for the void. A structural engineer needs to confirm how this will be done to ensure the existing flooring is adequately supported when the void is completed.
Specific Job Details:
Schedule: Not Specified
Budget: $1 - $500
Site Visit: Anytime
Need draftsperson/engineer for architectural drawings, structural engineering, and CDC approval for a new window in my kitchen Claremont Meadows,NSW
Specific Job Details:
Schedule: Flexible
Budget: Not Specified
Site Visit: Anytime
I’m looking for an independent structural engineer to inspect some cracking in my house. There’s a crack around a window internally, with corresponding cracking in the external brickwork, and I’ve recently noticed a few other cracks around the house. The main crack has been there since few years. I’d like to understand the cause, whether there is any active structural movement, and what the appropriate repair would be.
Specific Job Details:
Schedule: Flexible
Budget: Not Specified
Site Visit: Anytime
Hi
We are looking for a CDC to submit to council for BA.
Please contact us if you are interested.
Thank you
Specific Job Details:
Schedule: I’m flexible
Budget: Not Specified
Site Visit: Anytime
Structural design for renovation involving removal or alteration of 8 walls, a mix of load-bearing and non-load-bearing. Customer has existing architectural drawings and plans for the engineer to work from. Timeframe: within 2 weeks.
Specific Job Details:
Schedule: Need job done in the next few weeks
Budget: Not Specified
Site Visit: Anytime
SUBDIVISION PROJECT
Review Council requirements, survey and subdivision layout.
Confirm the minimum road/frontage upgrade or extension required to Skyring Street.
Prepare civil design for:
Roadworks and access
Stormwater drainage
Earthworks and lot levels
Water connections
Sewer connections
Erosion and sediment control
Prepare engineering drawings and calculations for the Operational Works application.
Provide RPEQ certification.
Liaise with Gladstone Regional Council and respond to engineering RFIs.
Coordinate with the town planner, surveyor and other service consultants.
Provide construction drawings suitable for civil contractor pricing.
Provide construction inspections and final/as-constructed certification if required.
Specific Job Details:
Schedule: Not Specified
Budget: Not Specified
Need to understand which walls are load bearing for potential renovations
House is single story metal truss roof. Floor plan attached. Site inspection available.
Specific Job Details:
Schedule: Need job done in the next few of weeks
Budget: $200 - $500
Site Visit: Anytime
We are seeking a qualified structural engineer for an upcoming project.
Scope may include:
Review of architectural/existing drawings
Structural assessment and design
Structural calculations
Engineering drawings and details
Certification as required for building approval
Please provide your indicative fee, availability, estimated turnaround time, and relevant registrations/qualifications via ServiceSeeking only at this stage.
Project documents and further details will be provided to suitable engineers.
Specific Job Details:
Schedule: I’m flexible
Budget: Not Specified
Need a structural engineer to inspect an existing residential property and provide a structural assessment/report Please provide your fee and availability only in service seeking.
Specific Job Details:
Schedule: Not Specified
Budget: Not Specified
I plan to establish a car pot, need a person can draw the plan for DA approving as it requires to wide the drive way and cross pass.
Specific Job Details:
Schedule: Not Specified
Budget: Not Specified
Site Visit: Anytime
I need a Engineers report for an internal skincare manufacturing facility.
We have drafts, Surveyor and we need to finalize the Structural report.
This is an urgent Job and we are looking for an engineer that can start almost immediately without overcharging us.
Our current Engineer needs 3-4 weeks but we cant wait this long as our builder needs to start ASAP.
Specific Job Details:
Schedule: Not Specified
Budget: Not Specified
Site Visit: Anytime