We need a class 2 engineer to assist on a project to add a lift to a 2 level unit to produce a class 2 regulated design declaration, drawings, and certificate of design adequacy. Also need a slab scan with penetrating radar. NOTE: The lift chosen does not require a significant structural connection to the building, such as the addition of lift shaft structural elements, as it is largely self-supporting. This will mostly be to assess the viability of adding a void and penetrating the water barrier.

Specific Job Details:

Schedule: I’m flexible

Budget: Not Specified

Site Visit: No site visit required

Structural plans for our small residential extension, including a widening of existing opening, small demo of a part of existing wall, slab details.

Specific Job Details:

Schedule: Not Specified

Budget: Not Specified

I would like to remove part of a brick wall to make a servery opening between the kitchen and dining room in my top floor strata apartment. I need an engineering certificate to confirm what is required from a structural perspective to do this. I am seeking quotes for the engineering certificate to see if this work is feasible within my budget. Please email me a quote.

Specific Job Details:

Schedule: I’m flexible

Budget: $1 - $500

Site Visit: Anytime

Hi

We need a structural engineer to advise on some renovation work. There is currently a pool in a suspended slab and large tiled area. We would like to:
- fill in part of the pool
- create a grassed area

We would like to ensure no impact to the stairs or house through this constuction.

Thanks
Tom

Specific Job Details:

Schedule: Flexible

Budget: Not Specified

Site Visit: Anytime

Need a structural engineer to check a residential building. Building inspection already completed.

Specific Job Details:

Schedule: I’m flexible

Budget: $500 - $1000

Site Visit: Anytime

I am building a new house at lara. Double story house. Looking for Structural Engineer to help on the drawings.

Specific Job Details:

Schedule: I’m flexible

Budget: Not Specified

Site Visit: Anytime

Advise on a temporary structure on load calculations; already have the CAD drawing in Fusion360 for the proposal which can be viewed here https://a360.co/4jmh8xj

Specific Job Details:
Platform is for a workshop.
Need to support 5 tonnes worth of machines and cabinets.
Designed so that the flooring can be tilted to allow vehicles through the workshop

Schedule: In a week

Budget: $100-$500

Summary of works:
Demo existing partition (3.2m) between kitchen wall and corridor and make good, we are unsure if it is load bearing.
If so provide structural certification and council approval (if required).

Specific Job Details:
Scope of Work – Structural Engineer
Project: Removal of 3.2 m load-bearing internal wall between kitchen and corridor
Location: Acacia Ridge, Queensland
The Structural Engineer is to provide professional engineering services to assess, design, document, and certify the proposed removal of a 3.2-metre internal load-bearing wall separating the kitchen from the corridor within an existing residential dwelling.
The scope includes undertaking a site inspection to confirm existing structural conditions, construction type, load paths, and any constraints if affecting the proposed works. The engineer is to determine whether the wall is load-bearing and identify all vertical and lateral loads currently supported by the wall, including roof, floor, or upper-storey loads if applicable.
The engineer is to design an appropriate structural solution to replace the wall, which may include (but is not limited to) steel beams, lintels, posts, brackets, pad footings, or other structural elements as required to safely transfer loads to existing or new supports.
The engineer is to prepare certified structural drawings and engineering computations suitable for building approval in Queensland. Drawings are to clearly show beam sizes, materials, connection details, bearing requirements, fixing methods, temporary propping requirements, and any associated structural works.
The engineer is to provide Form 15 – Design Certificate (Queensland) and any additional documentation required by the building certifier for approval.
During construction, the engineer is to provide construction-phase support as required, including responding to builder queries and undertaking at least one site inspection (if required) to confirm structural works have been installed in accordance with the approved design. Upon completion (if required), the engineer is to issue Form 16 – Inspection Certificate for the structural works.
All works and documentation must comply with the National Construction Code (NCC), relevant Australian Standards, and Queensland building legislation.

Scope of Work – Builder
Project: Removal of 3.2 m potentially load-bearing internal wall between kitchen and corridor
Location: Acacia Ridge, Queensland
The Builder is to carry out all works required to safely remove the existing 3.2-metre load-bearing internal wall between the kitchen and corridor in accordance with approved structural engineering documentation and building approval requirements.
The scope includes providing all labour, materials, plant, equipment, and temporary works necessary to complete the works safely and compliantly. Prior to demolition, the builder is to install temporary propping and support to maintain structural stability during wall removal, strictly in accordance with the engineer’s details.
The builder is to carefully demolish and remove the nominated structural wall, including disposal of all demolition materials off site. The builder is to supply and install all structural elements required by the engineer’s design, including beams, posts, brackets, footings, fixings, and any associated works.
The builder is to coordinate with the structural engineer and building certifier for all required inspections during construction and ensure works are not concealed prior to approval.
The builder is to make good all affected areas, including reinstatement of ceilings, walls, cornices, and finishes affected by the wall removal. This includes patching, plastering, and preparing surfaces ready for painting unless otherwise excluded. Any minor carpentry or framing adjustments required to integrate the new structure are included.
The builder is responsible for identifying and coordinating any necessary disconnection, relocation, or protection of services within the wall (including electrical wiring, plumbing, or other services) and for engaging licensed trades where required.
The builder is to maintain site safety at all times, comply with Workplace Health and Safety requirements, protect adjoining finishes, and leave the site clean and tidy upon completion.
All works are to comply with the approved structural drawings, National Construction Code (NCC), relevant Australian Standards, and Queensland building regulations.
Note that the wall is the one with the painting.

Schedule: Works can commence from 19/01/2026

Budget: $3000-$6000

We are seeking a structural engineer to inspect a double-storey house and provide professional advice regarding potential layout changes.

Specific Job Details:

Schedule: I’m flexible

Budget: Not Specified

There are two tasks I would like to be quoted on

1. Structural Adequacy Certificate to certify that the existing house foundation are sound solid for the first floor addition, without or with any minor remedial or repair work. How much the cost for this (including on-site visit and inspection)? How long will it take to complete?
2. If no major remedial or repair (underpin) needed for the existing old house for first floor addition, then proceed to have the structural engineering design/plan for the whole project including the first floor addition and the new extension build. How much cost for this? How long will it take to complete?

Specific Job Details:

Schedule: I’m flexible

Budget: $500 - $1000

Hello, I require a structural engineer to inspect the footings on my small art studio in North Warrandyte. ASAP! Thank you.

Required -
- footings inspected
- provide report and certificate or compliance
- engineer to amend current approved plans as timber stumps used in lieu of nominated steel.

Please call me asap with your best quote or hourly rate. Keen to complete this week ideally!

Specific Job Details:

Schedule: Need job done urgently

Budget: Not Specified

Site Visit: Anytime

I need certificate of adequacy for new cladding to replace non-compliant cladding as per council fire order

Specific Job Details:

Schedule: Need job done in the next few of weeks

Budget: Not Specified

Site Visit: Weekdays

For a proposed single storey dwelling in Wilton NSW 2571 we are seeking the following:

- Site Classification Report
- Structural Design
- Stormwater Design

I have attached preliminary concept plan. The full architectural drawing sets will follow shortly.

We require a quick turnaround and someone who will be taking very limited time-off during the festive period.

Thanks

Specific Job Details:

Schedule: Not Specified

Budget: Not Specified

Hi,

I hope you're doing well.

We are progressing with the 100 Derby residential project and would like to request an LGS framing design proposal, engineering certification, shop drawings, and supply quotation for the wall framing, first-floor LGS flooring system, and LGS roof trusses.
Project Summary
Ground Floor: Concrete raft slab

First Floor Structural Support: Structural steel

Wall Framing: Light Gauge Steel (LGS) wall framing

First Floor Flooring System: LGS joists / subfloor system

Roof Structure: LGS trusses

Required Scope
1. Design & Certification

Full engineering design of the LGS wall framing, first-floor joists, and trusses.

Nomination of all structural steel members required to support your LGS framing system.

Provide engineering certification compliant with Australian Standards.

2. Shop Drawings / Fabrication Drawings

Comprehensive LGS framing layouts (walls, floors, roof).

Member schedules, bracing details, and connection specifications.

3. Supply

Supply of all LGS fabricated components, connectors, fixings, and bracing systems.

4. Delivery

Delivery of all materials to the site with clear lead-time indications.

Please also advise:
Turnaround time for engineering & shop drawings

Manufacturing lead times

Any other information or documentation needed from us

Specific Job Details:

Schedule: Not Specified

Budget: Not Specified

I am owner builder and i need to serve form 7 protection work notice to neighbours for garage and retianing wall on the boundary and other side pool offset by 2m, i need someone to to help me articulate " will require you to get a methodology from the civil engineer that you can then follow when undertaking the works"

Specific Job Details:

Schedule: Need job done urgently

Budget: Not Specified

Site Visit: Anytime

we are builder based in canberra we need structral enginer for drawing we will.ask you first quote and if all. you must be licensed good we have another 5 projects till march 2026 input your interest best thank you[phone/email supplied]

Specific Job Details:

Schedule: Not Specified

Budget: $500-$1000

Site Visit: Anytime

I need an engineer to provide a structural report for an existing 10.5 x 9m American Barn Shed for the certifier to complete sign off. The shed is structurally sound and was built 20 years ago.

Specific Job Details:

Schedule: Need job done in the next few weeks

Budget: $500

Site Visit: Anytime

Speaking with the project builders for the construction of a single house in the Central Coast. It is a battleaxe block, backs onto the railway line.

The Project Builder is asking us for
1 - Electrolysis report and
2 - Aquastic Report

Specific Job Details:

Schedule: I’m flexible

Budget: Not Specified

I am after a structural engineer to sign off the mobile stage for a multicultural event in Craigieburn

Specific Job Details:

Schedule: Need job done urgently

Budget: Not Specified

Site Visit: Anytime

Job Post: Registered Structural Engineer Required
Project Title: Structural Design & Certification – 1.6m Front Fence Brick Pillars (City of Monash)
Category: Structural Engineering / Drafting
Location: Glen Waverley (Monash Council), VIC
Project Overview:
I am seeking a Registered Structural Engineer to design and certify the structural elements of a new front boundary fence to meet Building Permit requirements.
________________________________________
Scope of Work (Required Deliverables):
1. Site Review
• Assess existing site conditions and review available architectural/site drawings.
2. Structural Design & Calculations
• Provide engineering calculations for wind load and structural stability for:
o Brick pillars: approx. 450 mm × 450 mm (excluding cap), up to 1.6 m in height (including after installing the cap).
o Brick infill wall: 600–800 mm high single-brick wall between pillars (this may change).
o Steel infill panel: fitted above the brick infill up to approx. 1.50 m.
• Ensure the design meets relevant structural requirements for the Monash area.
3. Engineering Drawings
Provide detailed drawings including:
• Footing design: depth, width, and concrete specifications for pillars and brick infill wall.
• Reinforcement details: type, size, placement, and configuration of steel reinforcement (rebar) within the pillars and footings.
4. Certification
• Issue a signed Certificate of Compliance (Regulation 126) for submission to the Building Surveyor.
________________________________________
Fence Details (for Design Reference):
• Maximum design height: 1.6 m (This might change depending on council accepting report and consent maximum height)
• Construction: Brick/masonry pillars, brick base wall (600–800 mm height), and steel infill panels above.
________________________________________
Requirements:
• Please provide your VBA Registration Number.
• Quote a fixed price for the complete structural design and certification.

Specific Job Details:

Schedule: Not Specified

Budget: Not Specified

I am looking for structural engineer compliance certificate for the Frame, this is for obtaining OC ( Occupany certificate).

Specific Job Details:

Schedule: I’m flexible

Budget: Not Specified

A single-story house renovation job involving removing partition walls requires structural advice, report (certificate) and possibly drawings. We are at the early stage of planning. You need to be a qualified engineer with relevant experience to assess existing structure of the house. It would be a plus if you also have civil engineering experiences in designing retaining wall, OSD tank and carpark design.

Specific Job Details:

Schedule: I’m flexible

Budget: Not Specified

Site Visit: Weekdays
Site Visit: Business hours

Looking to get a structural engineer to do an inspection of my house and if required, will need a structural report / drawing.

Looking to remove 2 walls on level 2 of my house and need an inspection of a sagging floor.

Specific Job Details:

Schedule: Not Specified

Budget: $500 - $1000

Site Visit: Anytime

Recently got DA approved by the council to build a secodary dwelling studio flat above an existing double garage that is sitting at the rear with a lane access. Looking for structural and hydraulics engineer to do the engineering plan and the certifications needed.

Specific Job Details:

Schedule: Not Specified

Budget: Not Specified

I did a new build which needs a retaining wall in one boundary. The retaining wall is less than 0.5m height around 10 to 15m in length . Can you draw this. Plan to do in precast concrete sleepers and steel posts.
Have surveys and geo tech report. What is the final cost for DA plans including certification.
Thanks.

Specific Job Details:

Schedule: I’m flexible

Budget: Not Specified

Site Visit: Anytime

Regular check on structural and geographical integrity of the house

Specific Job Details:

Schedule: Need job done in the next few weeks

Budget: Not Specified

Site Visit: Anytime

I am looking for a Structural engineer to inspect and assess the property 204 Broadway reservoi 3073 VIC. As i am considering to do a major renovation such as removing the partition wall, and work on ceiling, we need to inspect and assess the property structurally. The property can be inspected after 4:00PM tuesday to saturday.

Specific Job Details:

Schedule: Not Specified

Budget: Not Specified