Doing granny flat need engineer who can work with me to use existing garage and achieve fire rating and 2.4 minimum height of garage which will be used as part of future granny flat.

Specific Job Details:

Schedule: Not Specified

Budget: Not Specified

Structural Assessment / Report of boundary fence and pool retaining wall:
The neighbouring property owner demolished their house and driveway. The excavation has removed the soil that was supporting my rear boundary — the steel fence posts are no longer in their concrete footings, and the brick wall beneath the fence, which forms the rear face of my in-ground concrete pool, has lost the ground that was buttressing it. The wall is old and showing signs of stress.

What I need:
1. An inspection of the wall, the fence footings and the pool, focused on the loss of lateral support — is the wall still sound, and is the pool shell affected?
2. Advice on what's required to make it safe and stable (reinstated support, underpinning, rebuild — whatever it turns out to be), with a specification I can have the work done to.
3. A short written report with your findings and recommended scope, plus photos of the as-found condition.

Specific Job Details:

Schedule: Not Specified

Budget: Not Specified

Site Visit: Anytime

need someone to inspect some cracks and provide report on the structure of my own house.
please text or reply to ad.

Specific Job Details:

Schedule: Need job done urgently

Budget: Under $200

Site Visit: Anytime

Seeking structural and civil engineering services for infrastructure projects. Services may include engineering assessments, project support, technical advice, design review, construction support, risk assessment, and coordination with project stakeholders. Experience with government and infrastructure projects preferred.

Seeking structural and civil engineering services for infrastructure projects. Services may include engineering assessments, project support, technical advice, design review, construction support, risk assessment, and coordination with project stakeholders. Experience with government and infrastructure projects preferred.

Specific Job Details:

Schedule: Not Specified

Budget: Not Specified

I am looking for structural engineer for my home extension, refer to the attached pic of the extension, the detail drawings will be ready in few days, please note that extension is on the floor.

Specific Job Details:

Schedule: Not Specified

Budget: Not Specified

Site Visit: Anytime

Seeking qualified Structural Engineering consultancies for potential infrastructure, and commercial engineering projects

Specific Job Details:

Schedule: I’m flexible

Budget: Not Specified

I have existing plans that have unfortunately gone out of date I need some who will bring them back up to current standars
Calle on[phone/email supplied]

Specific Job Details:

Schedule: Need job done in the next few weeks

Budget: Not Specified

Site Visit: Weekdays
Site Visit: Evenings

I am planning to buy a property, need somebody experienced and qualified to check on the foundation for any issues or anything with the structure. thanks

Specific Job Details:

Schedule: I’m flexible

Budget: Not Specified

I am looking for a qualified structural engineer to inspect and assess a crack in the front wall of my house and investigate possible ground settlement.

The crack was approximately 1 mm wide in June 2024 and has gradually widened to about 2 mm by June 2026. In addition, parts of the backyard appear to have sunk or become uneven, and I would like to determine whether any ground movement, settlement, or subsidence may be affecting the property.

I require a site inspection and a written engineering report. Please advise whether your service includes:

• Assessment of whether the crack is structural or cosmetic
• Confirmation of the current structural safety of the building
• Identification of any urgent repair requirements
• Investigation of possible settlement, subsidence, foundation movement, or drainage-related issues
• Floor level survey (if recommended) with measurements, diagrams, and findings included in the report
• Recommended repair or rectification options if structural issues are identified
• A report suitable for insurance purposes and/or to provide to builders or other contractors
• A short follow-up discussion to explain the findings and answer questions after the report is issued

Please provide a rough quotation for the inspection and report, along with details of what is included in your service.

Location: [Your Suburb, VIC]

Contact:
Phone:[phone/email supplied]
Email: [phone/email supplied]

Specific Job Details:

Schedule: I’m flexible

Budget: Not Specified

Site Visit: Anytime

There is a steel pergola constructed on the exsiting balcony wall. The clien needs an structural adequcy certificate for the council.

Specific Job Details:

Schedule: Not Specified

Budget: Not Specified

Looking for a structural engineer or experienced building inspector to inspect a 100-year-old house in Sydney.

There are several diagonal wall/plaster cracks around door frames and cornices.

Experience with older homes preferred.

Please contact me with availability and indicative cost.

Specific Job Details:

Schedule: Need job done on 17/05/2026

Budget: Not Specified

Site Visit: Weekends
Site Visit: Anytime

I need a structural engineer please, to do the engineering for several builds, firstly a couple of granny flats. 60m2 plus garage of nearly 42 plus deck of 24m2.
Thanks

Specific Job Details:

Schedule: Need job done urgently

Budget: Not Specified

Site Visit: Anytime

External contracter delayed work for driveway/ carpark, DDA ramp, retaining walls & civil work.
Work are non compliant as per Engineer. need report

Specific Job Details:

Schedule: Flexible

Budget: Not Specified

Site Visit: Anytime

RPEQ engineer needed to certify existing versalock retaining wall (over 1.2m) for retrospective building approval & Form 21. Pool compliance required.

Specific Job Details:

Schedule: Need job done urgently

Budget: Not Specified

Site Visit: Anytime

I am looking for a qualified Structural Engineer to assist with a kitchen renovation. I intend to remove an internal wall to create an open-plan space and require a professional assessment and certification.

Specific Job Details:
Scope of Work:
​Site Inspection: Visit my property in Baulkham Hills to inspect the wall and roof structure.
​Feasibility Report: Determine if the wall is load-bearing or non-load-bearing.
​Engineering Design: If the wall is load-bearing, provide the design/specifications for a structural beam (RSJ/Steel) and support points.
​Certification: Provide a structural certificate (Form 15 or equivalent) and any necessary documentation for council/private certifier approval.

Schedule: Not Specified

Budget: 1k

There a bit of old (non-active) termite damage in one of the ceiling corners in the 1st storey (of 2 stories) for house in Park Avenue, Rockhampton

We're looking for a structure engineer to:
* come onsite to conduct an assessment
* provide us a written report of severity of damage, and potential cost to repair
* complete the report & assessment prior to May 19th

See pictures of damage.

Please only provide us a quote for engineering assessment + report cost if you could complete it before May 19th.

Thanks
Johnathan

Specific Job Details:

Schedule: Not Specified

Budget: $500 - $1000

Site Visit: Anytime

Plans for building 2 story steel famed shed/workshop with mezzanine floor over/near a sewage easement running along the inside of my rear property size in total 150sm.

Specific Job Details:

Schedule: I’m flexible

Budget: Not Specified

Site Visit: Weekdays
Site Visit: Business-hours

While doing a tree looping job brickwork of a house was damaged. Damage is small but owner of house is requesting a structural engineer to confirm no damage to structure of the house.

Specific Job Details:

Schedule: Need job done urgently

Budget: Not Specified

Site Visit: Anytime

Structural Drawings for 60 Sqm granny
Flat CDC. Have drawings from previous build which we want to duplicate with minor changes.

Specific Job Details:

Schedule: Need job done in the next few of weeks

Budget: Not Specified

Site Visit: Anytime

Prepare and issue BCA Capability Report
Change of use building from shed to office.
DA is in progress. Need a Building Construction Australia report using our architect plans , draftsman plans, photos etc . Prefer smaller operator not a large firm.

Specific Job Details:

Schedule: Need job done urgently

Budget: Not Specified

Site Visit: Anytime

Review of existing structure to take new loads.
Design and certification of new renovation wirks

Specific Job Details:

Schedule: Need job done in the next few of weeks

Budget: Over $1000

Site Visit: Anytime

I have build a deck frame around a recently installed pool (decking boards have not beed installed yet). I am seeking a structual certificate to obtain council approval for part of the deck that will be covering a storm water easement on my property. Thanks, Brett.

Specific Job Details:

Schedule: Not Specified

Budget: $1 - $500

Site Visit: Anytime

Understood—you want the brief written **as instructions to the designer/consultant preparing tender drawings**, not just a neutral description.

Here’s the same scope framed as **direct requirements** for the person producing the CAD/3D and tender documentation.

***

## 1. General requirement

You are to develop a **fully coordinated 2D and 3D concept model and tender documentation** for the “Lakekamu River Pier Project” suitable for issue **“For Tender”**. The works include a piled river pier, an entrance shelter, access stairs to the water, and mooring/tie‑down arrangements.

Your deliverables must clearly define the **intended geometry, layout and functionality** so that contractors can price and programme the works, noting that final member sizing will be confirmed at detailed design.

***

## 2. Geometry and layout

1. Establish a project coordinate system with:
- Origin at the **landward corner of the 8 m x 8 m entrance building**, at deck finished floor level (FFL).
- X‑axis running **from land to river**, 0–30 m.
- Y‑axis running **across the pier width**, −10 m to +10 m.
- Z‑axis vertical, Z = 0 at deck FFL.

2. Model a **30 m (X) x 20 m (Y) fixed pier deck** over the river:
- Deck plan: 30 000 x 20 000 mm rectangle.
- Deck thickness: assume 250 mm reinforced concrete slab (clearly note as “subject to structural design”).

3. At the landward entrance, model an **8 m x 8 m building footprint**:
- Building to sit from X = 0 m to X = 8 m, centred about Y = 0 (Y = −4 m to +4 m).

***

## 3. Foundations and structure

4. Lay out driven reinforced concrete piles under the pier deck as a **regular grid** to be confirmed by structural design, but for tender:
- Provide at least four pile rows along the pier and four across the width (indicative 4 x 4 grid).
- Indicate **pile centres and diameters** (nominal 450–600 mm) and show toe at approx. Z = −14 m (8 m water + 6 m penetration), annotated “to be confirmed by geotechnical design”.

5. Model reinforced‑concrete **headstocks** over each pile row and **longitudinal/transverse beams (lineals)** supporting the slab:
- Headstocks to connect grouped piles in each row.
- Lineals to run both longitudinally and transversely to form a stable grillage.

6. Clearly distinguish in the drawings between:
- **Indicative member sizes for tender** (with explicit “subject to design” notes), and
- Fixed geometry (span lengths, plan dimensions, levels) which contractors must price.

***

## 4. Levels, water and freeboard

7. In sections and elevations, show:
- River bed level at nominal Z ≈ −8 m (water depth).
- A **design maximum river level** (to be provided/confirmed by client) and set the deck FFL **at least 2.5 m above this level**.
- Minimum freeboard dimensioned and labelled as a design requirement (e.g. “Deck FFL = RL XX.XX; Min freeboard above 1% AEP flood level = 2.5 m”).

You must ensure all structural depths (slab + beams) are coordinated so that the **2.5 m clearance above maximum water level is maintained**.

***

## 5. Entrance shelter (8 m x 8 m)

8. At the landward end, design and model an **8 m x 8 m shelter** as follows:
- Supported on the same pile / headstock system as the adjacent deck.
- Superstructure to be **lightweight steel or timber framing** with roof sheeting and open or partially clad sides.
- Clear head height to underside of roof: minimum 3.0 m above deck FFL.
- Roof overhang approximately 1.0 m around perimeter (overall ~10 x 10 m roof), to provide weather protection.

9. Internally, allow for:
- Open seating area for waiting passengers.
- Clear circulation to and from the pier deck and shore.
- Provision for future small services (lighting, noticeboard, small storage) — show conduits/allowances where practical.

Annotate drawings so that **tenderers understand the structure is primarily a shelter**, not a heavy enclosed building.

***

## 6. Stairs to water

10. From the pier deck near the river edge, design and model **access stairs** to serve low‑water boarding:
- Locate along the river edge in a central or otherwise agreed position.
- Provide a top landing at deck FFL and multiple flights/landings descending at least 5 m vertically.
- Design stairs with appropriate riser/going (for tender, assume ~160 mm riser/300 mm going) and show handrails both sides and non‑slip treads.

11. Ensure in section that:
- The lowest landing remains functional at typical low‑water conditions.
- Stairs are robust enough to be periodically submerged and impacted by debris (indicate reinforced concrete or steel with grating treads).

***

## 7. Moorings and rope tie‑downs

12. On the river‑facing deck edge (at X = 30 m), provide **fixed mooring points**:
- Show bollards, cleats or mooring rings at a reasonable spacing (e.g. aligned with pile positions, at Y ≈ −9, −3, +3, +9).
- Label each with required working load (to be confirmed with client or marine engineer).

13. On the outer row of river‑edge piles, detail **vertical rope tie‑downs**:
- Indicate rope runs fixed at the pile top and near water level, to allow boat lines to be secured and adjusted with water level.
- Show typical detail in elevation: eye plates, rope path, and note “Marine‑grade fittings; exact specification by contractor to engineer’s approval”.

***

## 8. Drawings to “For Tender” status

You are to produce, at a minimum, the following **tender drawings**:

1. General Arrangement Plan – Pier & Shelter
2. Longitudinal Section through pier centreline
3. Transverse Section at representative pile line
4. Entrance Shelter Plan and elevations
5. Stair to Water: plan, section and typical details
6. Mooring and Tie‑down Details (deck and pile‑mounted)

All drawings must:
- Be to scale (typically 1:100 for plans/sections, 1:25–1:50 for details).
- Include levels, dimensions, and clear notes so that **no critical geometry is left to contractor interpretation**.
- Be clearly stamped or titled **“For Tender”** and cross‑referenced to a written specification.

***

If you want, I can now draft a one‑page “Scope of Services – Pier Designer” you can attach to a consultancy RFP, telling them exactly what models and drawing formats (DWG, RVT, IFC, etc.) they must deliver at tender stage.

Specific Job Details:

Schedule: Not Specified

Budget: $500 - $1000

Site Visit: No site visit required