5,491Jobs Listed So Far

Posted: 20 April 2026
Budget: No Set Budget

Review of existing structure to take new loads.
Design and certification of new renovation wirks

Specific Job Details:

Schedule: Need job done in the next few of weeks

Budget: Over $1000

Site Visit: Anytime

Posted: 20 April 2026
Budget: $1 - $500

I have build a deck frame around a recently installed pool (decking boards have not beed installed yet). I am seeking a structual certificate to obtain council approval for part of the deck that will be covering a storm water easement on my property. Thanks, Brett.

Specific Job Details:

Schedule: Not Specified

Budget: $1 - $500

Site Visit: Anytime

Posted: 19 April 2026
Budget: $500 - $1000
Hope Island, QLD 4212

Understood—you want the brief written **as instructions to the designer/consultant preparing tender drawings**, not just a neutral description.

Here’s the same scope framed as **direct requirements** for the person producing the CAD/3D and tender documentation.

***

## 1. General requirement

You are to develop a **fully coordinated 2D and 3D concept model and tender documentation** for the “Lakekamu River Pier Project” suitable for issue **“For Tender”**. The works include a piled river pier, an entrance shelter, access stairs to the water, and mooring/tie‑down arrangements.

Your deliverables must clearly define the **intended geometry, layout and functionality** so that contractors can price and programme the works, noting that final member sizing will be confirmed at detailed design.

***

## 2. Geometry and layout

1. Establish a project coordinate system with:
- Origin at the **landward corner of the 8 m x 8 m entrance building**, at deck finished floor level (FFL).
- X‑axis running **from land to river**, 0–30 m.
- Y‑axis running **across the pier width**, −10 m to +10 m.
- Z‑axis vertical, Z = 0 at deck FFL.

2. Model a **30 m (X) x 20 m (Y) fixed pier deck** over the river:
- Deck plan: 30 000 x 20 000 mm rectangle.
- Deck thickness: assume 250 mm reinforced concrete slab (clearly note as “subject to structural design”).

3. At the landward entrance, model an **8 m x 8 m building footprint**:
- Building to sit from X = 0 m to X = 8 m, centred about Y = 0 (Y = −4 m to +4 m).

***

## 3. Foundations and structure

4. Lay out driven reinforced concrete piles under the pier deck as a **regular grid** to be confirmed by structural design, but for tender:
- Provide at least four pile rows along the pier and four across the width (indicative 4 x 4 grid).
- Indicate **pile centres and diameters** (nominal 450–600 mm) and show toe at approx. Z = −14 m (8 m water + 6 m penetration), annotated “to be confirmed by geotechnical design”.

5. Model reinforced‑concrete **headstocks** over each pile row and **longitudinal/transverse beams (lineals)** supporting the slab:
- Headstocks to connect grouped piles in each row.
- Lineals to run both longitudinally and transversely to form a stable grillage.

6. Clearly distinguish in the drawings between:
- **Indicative member sizes for tender** (with explicit “subject to design” notes), and
- Fixed geometry (span lengths, plan dimensions, levels) which contractors must price.

***

## 4. Levels, water and freeboard

7. In sections and elevations, show:
- River bed level at nominal Z ≈ −8 m (water depth).
- A **design maximum river level** (to be provided/confirmed by client) and set the deck FFL **at least 2.5 m above this level**.
- Minimum freeboard dimensioned and labelled as a design requirement (e.g. “Deck FFL = RL XX.XX; Min freeboard above 1% AEP flood level = 2.5 m”).

You must ensure all structural depths (slab + beams) are coordinated so that the **2.5 m clearance above maximum water level is maintained**.

***

## 5. Entrance shelter (8 m x 8 m)

8. At the landward end, design and model an **8 m x 8 m shelter** as follows:
- Supported on the same pile / headstock system as the adjacent deck.
- Superstructure to be **lightweight steel or timber framing** with roof sheeting and open or partially clad sides.
- Clear head height to underside of roof: minimum 3.0 m above deck FFL.
- Roof overhang approximately 1.0 m around perimeter (overall ~10 x 10 m roof), to provide weather protection.

9. Internally, allow for:
- Open seating area for waiting passengers.
- Clear circulation to and from the pier deck and shore.
- Provision for future small services (lighting, noticeboard, small storage) — show conduits/allowances where practical.

Annotate drawings so that **tenderers understand the structure is primarily a shelter**, not a heavy enclosed building.

***

## 6. Stairs to water

10. From the pier deck near the river edge, design and model **access stairs** to serve low‑water boarding:
- Locate along the river edge in a central or otherwise agreed position.
- Provide a top landing at deck FFL and multiple flights/landings descending at least 5 m vertically.
- Design stairs with appropriate riser/going (for tender, assume ~160 mm riser/300 mm going) and show handrails both sides and non‑slip treads.

11. Ensure in section that:
- The lowest landing remains functional at typical low‑water conditions.
- Stairs are robust enough to be periodically submerged and impacted by debris (indicate reinforced concrete or steel with grating treads).

***

## 7. Moorings and rope tie‑downs

12. On the river‑facing deck edge (at X = 30 m), provide **fixed mooring points**:
- Show bollards, cleats or mooring rings at a reasonable spacing (e.g. aligned with pile positions, at Y ≈ −9, −3, +3, +9).
- Label each with required working load (to be confirmed with client or marine engineer).

13. On the outer row of river‑edge piles, detail **vertical rope tie‑downs**:
- Indicate rope runs fixed at the pile top and near water level, to allow boat lines to be secured and adjusted with water level.
- Show typical detail in elevation: eye plates, rope path, and note “Marine‑grade fittings; exact specification by contractor to engineer’s approval”.

***

## 8. Drawings to “For Tender” status

You are to produce, at a minimum, the following **tender drawings**:

1. General Arrangement Plan – Pier & Shelter
2. Longitudinal Section through pier centreline
3. Transverse Section at representative pile line
4. Entrance Shelter Plan and elevations
5. Stair to Water: plan, section and typical details
6. Mooring and Tie‑down Details (deck and pile‑mounted)

All drawings must:
- Be to scale (typically 1:100 for plans/sections, 1:25–1:50 for details).
- Include levels, dimensions, and clear notes so that **no critical geometry is left to contractor interpretation**.
- Be clearly stamped or titled **“For Tender”** and cross‑referenced to a written specification.

***

If you want, I can now draft a one‑page “Scope of Services – Pier Designer” you can attach to a consultancy RFP, telling them exactly what models and drawing formats (DWG, RVT, IFC, etc.) they must deliver at tender stage.

Specific Job Details:

Schedule: Not Specified

Budget: $500 - $1000

Site Visit: No site visit required

Posted: 17 April 2026
Budget: No Set Budget

structural drawings for a secondary story extension, garage and pool , ready to hire for CC, DA approved.

Specific Job Details:

Schedule: Need job done urgently

Budget: Over $1000

Site Visit: Anytime

Posted: 17 April 2026
Budget: No Set Budget

Need someone is assess and repair the crack. It is outside the house in a detached garage

Specific Job Details:

Schedule: I’m flexible

Budget: Not Specified

Site Visit: Anytime

Posted: 13 April 2026
Budget: No Set Budget

I have a 7.5m x 7.5m shed that I have been gifted and want to erect in my backyard. I need drawings to be completed so that we can push forward with the permit.

Specific Job Details:

Schedule: I’m flexible

Budget: Not Specified

Posted: 13 April 2026
Budget: No Set Budget

Engineering design and construction services for reservoir upgrades, including structural assessments, retaining wall design, roof replacement with integrated access systems, drainage improvements, and electrical/telemetry upgrades, ensuring safety, compliance, and long-term asset reliability.

Specific Job Details:

Schedule: Not Specified

Budget: Not Specified

Posted: 11 April 2026
Budget: $500 - $1000

Need structural plans and calculation for slab, beam details, bracing layout, column details and all requirements to obtain building consent

Specific Job Details:

Schedule: I’m flexible

Budget: $500 - $1000

Site Visit: No site visit required

Posted: 09 April 2026
Budget: No Set Budget
Northam, WA 6401

Im slab concreter.

I need an engineer to visit site by today for concrete slabs

Happy to pay for your initial service:

Cheers
Raiyan

Specific Job Details:

Schedule: Need job done urgently

Budget: Not Specified

Site Visit: Anytime

Posted: 08 April 2026
Budget: $500 - $1000

Engineering of the basic structure to support deck on top of modern roof

Specific Job Details:

Schedule: I’m flexible

Budget: $500 - $1000

Site Visit: Anytime

Posted: 08 April 2026
Budget: No Set Budget

Seeking a structural engineer to inspect completed works and to prepare a report for Council. Please CALL. No emailing nor texting. Thanks

Specific Job Details:

Schedule: Not Specified

Budget: Not Specified

Posted: 07 April 2026
Budget: No Set Budget

We are a community centre and we are having solar panels installed on our roof. As this building is owned by council they require an engineers report on the roof before it can be installed

Specific Job Details:

Schedule: Not Specified

Budget: Not Specified

Posted: 27 March 2026
Budget: No Set Budget

Need a quote to do OoS SEA for my build site. The site has a DN1050 RCP, and DN150 VCP. I have structural plans updated in line with SPR. [phone/email supplied]

Specific Job Details:

Schedule: I’m flexible

Budget: Not Specified

Posted: 25 March 2026
Budget: $100 - $500

Engineering Drawings and Form 15 for either a
21m x 2.5m concrete sleeper retaining wall

Or

21m x 2.5m block wall

depending on footings size and what option is more feasible and efficient

Specific Job Details:

Schedule: Need job done urgently

Budget: $100 - $500

Site Visit: Anytime

Posted: 24 March 2026
Budget: No Set Budget

We are seeking qualified structural engineers to certify modular homes. This is to build a network of trusted professionals ready to be contacted for future projects.

If you are interested, please provide your contact details.

Specific Job Details:

Schedule: I’m flexible

Budget: Not Specified

Posted: 24 March 2026
Budget: No Set Budget

Need engineer/structural drawings to a retaining wall - circa 8m long by 1m high.

Require:

1 - injection grouting design
2 - retaining design (plan is panel and post)

Suitable for council submission

Specific Job Details:

Schedule: Need job done in the next few weeks

Budget: Not Specified

Site Visit: Anytime

Posted: 23 March 2026
Budget: No Set Budget

Retaining wall in the sub floor area which needs to be inspected and designed for rectification. The wall is around 2.5 m high and is retaining soil and a pedestrian pathway on the other side. please allow for site visit, design and coordination with the builder for finalising design and reviewing the progress to issue certificates at the end.

Specific Job Details:

Schedule: Need job done in the next few of weeks

Budget: Not Specified

Site Visit: Weekend

Site Visit: Anytime

Posted: 22 March 2026
Budget: $100 - $500

Structural Drawings for fly over roof
Form 15 & 12

Specific Job Details:

Schedule: Need job done urgently

Budget: $100 - $500

Site Visit: Anytime

Posted: 21 March 2026
Budget: $500 - $1000

Engineering plans
Form 15
Form 12
Engineering has already been provided for the proposed shed

Specific Job Details:

Schedule: Need job done urgently

Budget: $500 - $1000

Site Visit: Anytime

Posted: 20 March 2026
Budget: No Set Budget

We are seeking Expressions of Interest EOI from suitably qualified STRUCTURAL & CIVIL Engineers for a 3-level commercial development with basement.

The project comprises a 3-storey Type A commercial building with basement, including a reinforced concrete structure (slabs, columns and boundary shoring), two footpath upgrades, new stormwater infrastructure, and coordination with construction and public domain works. The site has three frontages and will require integrated structural, civil and drainage design.

For consideration, could you please provide the following:
• Company profile, nominated project lead and capability statement
• CV of the lead engineers
• CPEng / NER registration details
• 3–5 relevant project examples and references
• Summary of experience in:
o Structural systems (including flat slab/flat plate, shoring, awning, Dincel walls)
o Stormwater and public domain works (footpath/driveway)
• Current availability
• Professional registration and insurance details
Please email your submission to [phone/email supplied]

Specific Job Details:

Schedule: I’m flexible

Budget: Not Specified

Posted: 18 March 2026
Budget: $1 - $500

I require a qualified structural engineer to provide a Certificate of Structural Adequacy for retaining walls at my property.
The walls were recently constructed by a licensed structural landscaper, based on advice from our project home builder, as similar retaining walls previously existed on the site. Following a neighbour complaint regarding the terrace height, Council inspected the works.
While Council officers indicated that the walls appear structurally sound and include appropriate drainage (ag pipes) and grading, they have requested a Certificate of Structural Adequacy to support the works. This is to avoid the need to reduce the wall height to 600mm, as the current walls are approximately 1200mm high.

Specific Job Details:

Schedule: Not Specified

Budget: $1 - $500

Site Visit: Anytime

Posted: 18 March 2026
Budget: No Set Budget

Seeking quote for design (including drawings) of section of retaining wall between mine and neighbour's property.
Approx height from our GL to neighbour's is 1100 mm; length approx. 11 m. Colorbond fence will be installed afterwards.
Need drawings for council approval (City of Joondalup).
Visit to property likely to be needed, but photos attached.

Posted: 14 March 2026
Budget: No Set Budget

Looking for a structural engineer for a small and straightforward inspection to confirm whether an internal wall can be removed
• Wall size: approx 3.6m wide x 2.5m high
• Builder has checked via the roof manhole and believes it is non-structural, but we need professional confirmation.
• Property: freestanding house in Willoughby NSW
• Prefer someone who can inspect on site and provide written confirmation/report if possible.

Please provide a quote in text. Thanks

Location: North Willoughby

Specific Job Details:

Schedule: I’m flexible

Budget: $400-$900

Site Visit: Anytime

Posted: 13 March 2026
Budget: No Set Budget

We need Structural and Civil Engineering for the proposed three double storey development in Deer Park. Please let me know if you do only structural or civil design or both.
We need structural engineering for the building permit application and civil engineering design for council approval and building permit.

Specific Job Details:

Schedule: Not Specified

Budget: Not Specified

Site Visit: Anytime

Posted: 13 March 2026
Budget: No Set Budget

Structural engineering services involve the assessment, design, and analysis of building structures to ensure safety, stability, and durability. Services include structural inspections, load calculations, preparation of engineering drawings, repair and reinforcement strategies, and supervision of construction works. The goal is to ensure buildings and infrastructure meet regulatory standards while maintaining structural integrity and long-term performance.

Specific Job Details:

Schedule: Not Specified

Budget: Not Specified

Posted: 12 March 2026
Budget: No Set Budget

I am staying in multi-storied apts. the person above has cracked the celling slab by hammering. Thus want structural engineer who can give the correct procedure for modifying and to give report on the same to submit yo Body Corp for restoration

Specific Job Details:

Schedule: I’m flexible

Budget: Not Specified

Site Visit: Weekdays
Site Visit: Anytime

Posted: 12 March 2026
Budget: $700

I urgently require driveway plans in accordance with council mark-up for CDC. I need this by monday

Specific Job Details:

Schedule: Not Specified

Budget: $700

Site Visit: No site visit required

Posted: 11 March 2026
Budget: $500 - $1000
Cessnock, NSW 2325

driveway for battleaxe block. retaining wall. experienced and understanding of build cost.

Specific Job Details:

Schedule: Flexible

Budget: $500-$1000

Site Visit: Anytime

Posted: 11 March 2026
Budget: No Set Budget

Hi I need a structural engineer to provide building licence plans for a timber framed residence of 200 sqm to allow for a building licence

Specific Job Details:

Schedule: I’m flexible

Budget: Not Specified

Site Visit: Anytime

Posted: 10 March 2026
Budget: No Set Budget

a copy of the structural design for the proposed alteration works. The
structural design is to be accompanied by engineer computations, where relevant, and an Reg 126 Certificate of Compliance.

Specific Job Details:

Schedule: Not Specified

Budget: Not Specified